Stainless Steel Products


We are counted among the leading traders and importers of Stainless Steel Products in the entire domestic market. All our products are sourced from reputed manufacturers, who specialize in developing the entire range as per the application needs of our clients. Our vendors make use of high-grade raw material and sophisticated methodologies for manufacturing these stainless steel products.

Stainless Steel Plates

Our clients can avail from us a comprehensive range of Stainless SteelPlates that are manufactured in line with the prevailing industry standards. These plates can be availed in different grades like austenitic, duplex, martensitic and ferritic. Furthermore, the stainless steel plates offered by us can be provided in 3 mm to 100 mm thickness and 1000 mm to 3200 mm width. The length of these plates can be custom-made in 2438 mm/3048 mm/6096 mm and 13500 mm. Features: Grades: Austenitic, Duplex, Martensitic, Ferritic Surface: No.1 Finished Thickness: 3 mm to 100 mm Width: 1000 mm to 3200mm Length: 2438 mm / 3048 mm / 6096 mm to 13500 mm All Grades : Austenitic, Duplex, Martensitic, Ferritic Special grades : 310S, 309S, 317L, 904L, Duplex 2005, 230 Stainless Steel Plates Prime Materials - ASTM A240/ASME SA 240, NACE MR 01 - 75, EN 10204 3.1 Coil, Sheet and plate dimension (in mm)

 

 

 

 

 

Duplex Stainless Steel

 Duplex stainless steel plate in specification S31803 (1.4462) and S32205.

Duplex stainless steel was developed as a product which could improve upon some of the technical weaknesses of the standard austenitic and ferritic stainless steels that are available in the market. Both have low strength, ferritic steels have poor low temperature toughness, and austenitic steels have a very low resistance to stress corrosion cracking. Duplex stainless has a microstructure which is split roughly 50:50 between austenite and ferrite and balancing of these phases provides the following benefits: 
·      Higher strength which is around twice that of Type 304 austenitic stainless steel. This leads to reduced plate thicknesses being used in fabrications reducing the weight which is of particular significance in items such as pressure vessels, storage tanks, and structural applications such as bridges.
·      Good weldability in thick plates.
·      Good low temperature toughness.
·      Resistance to stress corrosion cracking of importance in many applications including hot water tanks, process plant, brewing tanks, and desalination plant.

It is worth noting that Duplex stainless steels are still being developed and improved by steel makers.

Another key feature of Duplex stainless is its enhanced corrosion resistance. There is no single measure of corrosion resistance but the Pitting Resistance Equivalent Number (PREN) is widely used as a means of comparing the relative corrosion resistance of different steel grades. The PREN is obtained by applying a mathematical formula to the chemical composition of a steel so that PREN = %Cr (3.3 x %Mo) (16 x %N). Using this formula 31803 Duplex stainless has a PREN of 35 which when compared with the PREN of Type 304 and Type 316 (18 and 24 respectively) demonstrates its superior corrosion resistance.

In short, due to its higher strength, longer component life cycle, and lower alloy composition, Duplex stainless can be a very cost effective solution to an engineering problem. 

.

 

 

 

 

Super Duplex Stainless Steel

We hold stock of Super Duplex stainless steel plate specifications UNS S32750 (1.4410) and UNS S32760 (1.4501). In order to get more specific information on these steel grades click the following links:

  • Super Duplex S32750
  • Super Duplex S32760

A Super Duplex stainless steel is a type of Duplex stainless steel with enhanced corrosion resistance which is categorised by its PREN being greater than 40. A standard Duplex like the S31803 grade stocked by us has a PREN of around 35. The Pitting Resistance Equivalent Number (PREN) is widely used as a means of comparing the relative corrosion resistance of different steel grades. The PREN is obtained by applying a mathematical formula to the chemical composition of a steel so that PREN = %Cr (3.3 x %Mo) (16 x %N). 

As a part of the Duplex family of stainless steels Super Duplex stainless has a microstructure which is split roughly 50:50 between austenite and ferrite. It differs from Duplex in its chemical composition (with increased amounts of Molybdenum, Nickel, and Chromium) and its mechanical properties (higher proof stress and tensile strength). This highly alloyed product is especially designed for marine, chemical, and oil engineering applications requiring both high mechanical strength and resistance to corrosion in extremely aggressive environments (chloride-containing acids etc.).

Super Duplex stainless steel, relative to other stainless steel products, gives

  • High corrosion resistance
  • High resistance to stress corrosion cracking
  • High yield strength and tensile strength

It is used extensively for offshore oil and gas applications and can be found in flow lines, risers, process vessels, separators, coolers, manifolds, and process piping. Onshore it can be found in heat exchangers, boilers, and pressure vessels in petrochemical and chemical processing plant.

 

 

 

 

Boiler Quality Plates

We are well equipped to provide our customers with supreme quality Boiler Quality Plates. These quality-verified plates are used in many high-end industrial and mechanical applications. Our entire range is directly sourced from the production facility of reputed vendors, who manufacture them using superlative quality metal alloys. Furthermore, we are an expert at providing these plates in customized forms.

 

 

 

 

Duplex Steel Plates

We import and supply a wide range of high quality Duplex Steel Plateswhich are also known as ferrite-austenitic stainless steels. These plates comprise of beneficial properties of ferrite and austenitic stainless steels. It has high strength and excellent corrosion resistance .Other prominent properties include good resistance to fatigue and corrosion fatigue, good abrasion and erosion resistance.

 

 

 

 

 

Nickel Alloy Sheets

We offer wide range of good quality Nickel Alloy Sheets at very affordable price. These sheets are available in different shapes, sizes and thickness according to the needs of our customers. As we are customer centric organization so their satisfaction is a goal that we always try to achieve without compromising on quality.

 

 

 

 

 

Industrial Steel Plates

We provide our clients with an extensive range of Industrial Steel Plates that are available in various dimensions. These products are manufactured using quality approved steel and advanced machines at our vendors unit. Our steel items are demanded in various industries to cater to the variegated applications needs of the clients.

 

 

Stainless Steel Sheets

We offer wide range of good quality Stainless Steel Sheets at affordable price. These stainless steel pipes are used in many industries, constructions, and in water pipelines. We basically import and supply various types of Stainless Steel Sheets such as SS Seamless Pipes, SS Welded Pipes, Alloy Steel Seamless Pipes and CS Seamless Pipes.

 

 

 

 

 

Stainless steel Coils

Owing to our experience, we have been successful in catering to the requirements of our esteem clients by offering quality Stainless Steel Coils. The offered range of stainless steel coils is procured from authentic vendors, who ensure to develop it in complete adherence with the international quality standards and guidelines. Known for their high tensile strength and rust proof nature, these products are applicable in different fronts. Along with this, the offered range also includes other products as enlisted below:

 

 

 

 

 

stainless Steel Forged Plate EN 15CDV6

We can produce 1.7734 EN 15CDV6 stainless steel forged plates 1.7734 EN 15CDV6 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With production experience, strict control 1.7734 EN 15CDV6 chemical composition and 1.7734 EN 15CDV6 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

1.7734 Designation by Standards

Brand Name

LH No.

Mat. No.

DIN

EN

AISI

PO795

795

1.7734

-

15CDV6

-

Chemical Composition (in weight %)

C

Si

Mn

Cr

Mo

Ni

V

W

Others

0.15

max. 0.20

0.95

1.38

0.90

-

0.25

-

-

Description

This is chromium-molybdenum-vanadium Structural steels. Good bending performance and excellent weldability. Toughness, consistency and resistance to fatique derived from the high level of micro cleanliness.

Applications
Component parts for the aircraft industry. 

Physical properties (avarage values) at ambient temperature
Modulus of elasticity [103 x N/mm2]: 190-210 
Density [g/cm3]: 7.80

 

 

Seamless Pipes

Prominent & Leading Exporter and Distributor from Mumbai, we offer Seamless Pipes such as S.S Seamless Pipes, Carbon Steam Seamless Pipes and Alloy Steel Seamless Pipes.

 

 

 

Stainless Steel Welded Pipes

We hold an expertise in supplying very high quality Standard Stainless Steel Welded Pipes. These sheets are manufactured using latest technology machinery and finest quality raw material to ensure better quality and long lasting properties. We can provide you stainless steel sheets in different shape, thickness and sizes according to the needs. We basically import and distribute following type of stainless steel sheets such as industrial steel plates, duplex steel plates and boiler quality plates.

 

 

 

Pressure Vessels

We offer our clients with a wide range of Pressure Vessels that are available in various size and capacities. These pressure vessels are manufactured with the use of quality approved steel and advanced technologies at our vendors production unit. Our range is appreciated for its capacity to withstand high pressure & temperature and excellent performance efficiency under stressful conditions.

 

 

 

 

Nickel 200 - UNS N02200

Nickel 200 is 99.6% tough metals that can be found on the earth's surface. This metal has excellent mechanical properties such as low gas content, high thermal and electrical conductivity. Owing to these properties as well as its chemical composition, Nickel 200 is highly resistant to corrosive environment and corrosion by neutral and alkaline salt solutions. It corrodes at a low rate in neutral and distilled water. 
This Nickel 200 is extremely useful in any environment below 600° F. We offer this nickel 200 in various forms like wire , Round bar, Forged bar , hex bar , Flat bar , Circles , Ring , Tube , seamless Pipe , Welded / ERW Pipe , Sheet , Plate , Coil , Flanges , fasteners , Socket weld Fittings , ferrule fittings , Buttweld fittings Like cap , elbow , tee , Reducer. Our Nickel 200 Sheet, Nickel 200 Plate and nickel 200 products are available in pure (99.2%) wrought nickel with good mechanical properties and resistance to a range of corrosive media. 

 

 

Hastelloy

Common Trade Names :
Hastelloy C276 , Nickelvac  HC-276, Inconel  C276, Nicrofer  5716 

Hastelloy C-276  is a nickel-molybdenum-chromium alloy with excellent corrosion resistance in severe environments. Inconel C-276  is used in pollution control, chemical processing, pulp and paper production, and waste treatment. Available forms for wire , Round bar, Forged bar , hex bar , Flat bar , Circles , Ring , Tube , seamless Pipe , Welded / ERW Pipe , Sheet , Plate , Coil , Flanges , fasteners , Socket weld Fittings , ferrule fittings , Buttweld fittings Like cap , elbow , tee , Reducer. 

We manufacture and exports wide range of Hastelloy C276 /UNS N010276 which is available in Hastelloy C276 wire , Hastelloy C276 Round bar, Hastelloy C276 Forged bar , Hastelloy C276 hex bar , Hastelloy C276 Flat bar , Hastelloy C276 Circles , Hastelloy C276 Ring , Hastelloy C276 Tube , Hastelloy C276 Seamless Pipe , Hastelloy C276 Welded / ERW Pipe , Hastelloy C276 Sheet , Hastelloy C276 Plate , Hastelloy C276 Coil , Hastelloy C276 Flanges , Hastelloy C276 fasteners , Hastelloy C276 Socket weld Fittings , Hastelloy C276 ferrule fittings , Hastelloy C276 Buttweld fittings Like cap , elbow , tee , Reducer.
We also exports wide range of hastelloy sheet, hastelloy plate and hastelloy plate according to ASME, AMS, DIN, GB etc.

 

 

 

Inconel

Inconel   625 is a nonmagnetic, corrosion and oxidation resistant, nickel-base alloy. It has high strength and toughness in the temperature range cryogenic to 2000°F (1093°C) which is derived largely from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel-chromium matrix. Alloy 625 has excellent fatigue strength and stress - corrosion cracking resistance to chloride ions. 
Typical applications for Alloy 625 have included heat shields, furnace hardware, gas turbine engine ducting, combustion liners, spray bars, chemical plant hardware and special seawater applications. Available forms are wire , Round bar, Forged bar , hex bar , Flat bar , Circles , Ring , Tube , seamless Pipe , Welded / ERW Pipe , Sheet , Plate , Coil , Flanges , fasteners , Socket weld Fittings , ferrule fittings , Buttweld fittings Like cap , elbow , tee , Reducer. 

UNS N06625/Inconel 625 is available in various forms like Inconel 625 wire , Inconel 625 Round bar, Inconel 625 Forged bar , Inconel 625 hex bar , Inconel 625 Flat bar , Inconel 625 Circles , Inconel 625 Ring , Inconel 625 Tube , Inconel 625 seamless Pipe , Inconel 625 Welded / ERW Pipe , Inconel 625 Sheet , Inconel 625 Plate , Inconel 625 Coil , Inconel 625 Flanges , Inconel 625 fasteners , Inconel 625 Socket weld Fittings , Inconel 625 ferrule fittings , Inconel 625 Buttweld fittings Like cap , elbow , tee , Reducer. 

 

 

 

Monel

Monel 400 is a combination of nickel and copper and is hardened by cold working only. This alloy is widely renowned for for its corrosion resistant properties against flowing sea - water and is extensively used for marine applications. Monel is also extremely resistant to stress corrosion cracking in most freshwaters. High temperature ( up to 1000 °F) has no effect on this alloy and it also has excellent mechanical properties at subzero temperatures. 
Monel 400 is available in many forms like wire , Round bar, Forged bar , hex bar , Flat bar , Circles , Ring , Tube , seamless Pipe , Welded / ERW Pipe , Sheet , Plate , Coil , Flanges , fasteners , Socket weld Fittings , ferrule fittings , Buttweld fittings Like cap , elbow , tee. UNS N04400 is available in various forms like Monel 400 wire , Monel 400 Round bar, Monel 400 Forged bar , Monel 400 hex bar , Monel 400 Flat bar , Monel 400 Circles , Monel 400 Ring , Monel 400 Tube , Monel 400 seamless Pipe , Monel 400 Welded / ERW Pipe , Monel 400 Sheet , Monel 400 Plate , Monel 400 Coil , Monel 400 Flanges , Monel 400 fasteners , Monel 400 Socket weld Fittings , Monel 400 ferrule fittings , Monel 400 Buttweld fittings Like cap , elbow , tee , Reducer. 


 

 

 

Titanium

Our range of titanium are titanium gr.2 seamless pipes, titanium gr.5 erw pipes, titanium gr.2 round bar, titanium gr.5 flange, titanium gr.2 fittings, titanium gr.5 tee, titanium gr.2 elbow, titanium gr.5 reducer, titanium gr.2 cap, titanium gr.5 fasteners, titanium gr.2 sheet, titanium gr.5 plate, titanium gr.2 tube etc.
Also manufacturers tungsten pipe, tungsten plate, tungsten round bar, tungsten sheet and tungsten tube.
Our tungsten like tungsten round bar, tungsten sheet, tungsten plate, tungsten pipe, tungsten tube are four times harder than titanium products.

 

 

 

Pressure Vessel Plate

The technical specifications available from stock are:

ASME SA516 Gr. 70 

ASTM A516 Gr. 70 

EN 10028-3 P355NH 

EN 10028-3 P355NL1 

EN 10028-3 P355NL2 

BS 1501 223 490B LT30 

BS 1501 224 490B LT50 

BS 1501 225 490B LT50 

ASME SA537 Class 1 

ASTM A537 Class 1 

ASME SA516 Gr. 65 

ASTM A516 Gr. 65 

ASME SA516 Gr. 60 

ASTM A516 Gr. 60 

EN 10028-3 P460NH

EN 10028-3 P460NL1

EN 10028-3 P460NL2 

 

Not only do we consider ourselves specialists in pressure vessel plate and its processing but we are proud to confirm that, unlike some other steel companies, all of the grades indicated above are genuine product lines that are always in stock


Pressure Vessel Plate Stock Size Range

Thickness:

From 3 mm to 200 mm 

Width:

From 2,000 mm to 4,000 mm

Length: 

Up to 20,000 mm 

 

 

 

 

 

 

 

Boiler Plate Steel

Available from stock all steel plate can be cut to size and shape according to your fabrication and design requirements and all work is governed by our independently accredited and regularly audited quality systems to ISO 9001.

Our plates are sourced from the highest quality steel manufacturers in the world and, like all our suppliers, these manufacturers have been vetted and assessed by our procurement team. This not only means that the quality of our stock is assured but also that our extensive supply partnerships offer the opportunity for us to supply non-stock items or non-standard sizes directly from the steel mill to our customers. Using this form of supply it is often possible to deliver much faster than “standard” mill lead times.

All of our plates and plate products can be delivered to customers anywhere in the world using the services of our own in-house logistics staff.

Boiler Plate Steel Stock Size Range

Thickness: From 3 mm to 200 mm

Width: 2,000 mm, 2,500 mm, 3,000 mm, 3,450 mm, 3,500 mm, 4,000 mm

Length: Up to 20,000 mm

 

 

 

 

 

HIC Steel Plate

HIC Steel Specifications Available From Stock

ASME SA516 Grade 60

ASME SA516 Grade 65

ASME SA516 Grade 70

ASTM A516 Grade 60

ASTM A516 Grade 65

ASTM A516 Grade 70

 

Size Range For HIC Steel Plates

Thicknesses: 6-105 mm
Widths: 2 metres, 2.5 metres, 3 metres
Lengths: up to 12 metres

Technical Specifications Chemical Analysis

Max Ceq 0.41% <= 50mm, 0.43% > 50mm
Max S  0.001%, P  0.008%, Nb  0.015%, V  0.005%, O  0.002%

All material is made with an Electric Arc Furnace, fully killed, vacuum degassed, with fine grain.

 

 

 

Quenched and Tempered Steel Plate

We offers one of the largest ranges of high strength quenched and tempered structural steel plate in Europe. A variety of steel specifications is available including those with a minimum yield strength of 690 MPa and with a minimum yield strength of 890 MPa. The stock encompasses a range of sophisticated high strength low alloy steel plates from leading Western European producers and is supplied in plate thicknesses from 3 mm up to 300 mm.

  • High Strength Quenched and Tempered Steel Plate
  • High Yield Quenched and Tempered Steel Plate
  • High Strength Structural Steel Plate,
  • High Yield Structural Steel Plate
  • High Strength Low Alloy Steel Plate
  • HSLA

Specifications and grades

EN 10025 S690QL, EN 10025 S890QL, EN 10025 S960QL

RQT® 701, RQT® 901

Stock size range:

Thicknesses: 3 mm to 300 mm
Widths: 2000 mm, 2500 mm, 3000 mm
Lengths: Up to 12000 mm lon

 

 

 

 

Abrasion Resistant Steel Plate

Abrasion resistant steel plate is also known in the engineering industry by a variety of other names which include:

  • Wear resistant plate
  • Wear plate
  • 400 Brinell plate
  Stock Size Range

Plate thickness: 3 mm up to 150 mm

Plate size: up to 12000 mm x 3000 mm

 

 

High Yield cold Forming Steel Plate

High yield cold forming steel plate offers both strength and formability, with excellent surface quality, dimensional and geometrical accuracy and uniformity of properties. 

Steel structures can be made lighter which means that the payload of machines and equipment can be increased and fuel consumption reduced.

Welding

Despite its high strength, this steel is easier to weld than conventional lower yield grades.  Good weldability means that preheating is not necessary under normal conditions.  Surfaces must be both dry and clean before welding and welding materials must be of sufficiently low hydrogen content.

The weld material properties, including strength, can be of a lower strength than the steel being used provided that the weld is situated in a less stressed part of the structure. 

Applications

  • Agricultural equipment
  • Axle parts
  • Crane booms
  • Defence applications
  • Low weight piling
  • Mechanical handling
  • Side impact protection systems
  • Truck body
  • Vehicle chassis
Technical Specifications Chemical Properties

Steel Grade

C
max

Si
max

Mn
max

P
max

S
max

Al
max

Optim 700 

0.10

0.20

2.10 

0.02 

0.01 

0.015 

Heat analysis (%)

 

Yield Steel Plate

With availability in both structural and pressure vessel grades in a wide range of plate sizes and thicknesses. Steel can be supplied as plates, cut plates, or profiles (cut to shape).

We recognise the need for an ex-stock source of 460 yield plate and are able to offer the following material:

  • EN 10028-3 P460NL1
  • EN 10028-3 P460NL2
  • EN 10028-3 P460NH
  • EN 10025-3 S460N
  • EN 10025-3 S460NL
Applications
  • Bridges
  • Grouted tees/Grouted sleeves
  • Pipe caps/Pipe fittings
  • Pipe lines
  • Plate girders
  • Pressure vessels
  • Road tankers
Technical Specifications

The information below gives an overview: more detailed information on specific grades may be found on the product pages in this section of the web site.

C
max

Si
max

Mn
max

P
max

S
max

Al total
min

N
max

0.20

0.60

1.10 to 1.70

0.020

0.005

0.020

0.025

Chemical Composition (Ladle %)

 

Cr
max

Cu
max

Mo
max

Nb
max

Ni
max

Ti
max

V
max

0.30

0.70

0.10

0.05

0.80

0.03

0.20

 

 

 

 

 

Chrome Moly Plate

There are many chromium molybdenum steel products available, each of which has very different chemical and mechanical properties, but they are often grouped as a single category. Chrome moly is the most common name for this group but other names that are used include chromalloy, croalloy, and Cr-Mo (pronounced “cro-mo”).

Typical applications will include:

  • Boilers
  • Pressure Vessels
  • Heat Exchangers
  • Flanges
  • Valves
  • Ducting
  • Pipe Supports

Chrome Moly pressure vessel plates from Brown McFarlane are manufactured to the following steel standards:

ASME SA387 

ASTM A387 

EN10028-2 


Size Range 

Chrome Moly plates are available:

Thicknesses:

6 mm -100 mm

Widths:

2000 mm, 2500 mm

Length:

up to 12000 mm

 

 

 

 

 

 

Offshore Structural Plate

From the most basic structural grade through to highly specialised project related specifications, steel is available shot blasted and primed from stock and can be cut to size.

We can provide a complete project service, with fast track mill service available – for distribution worldwide.

Specifications
  • BS EN 10025
  • S235, S275, S355, S420, S460, S690, S890, S960
  • BS EN 10225
  • S355, S420, S460
  • API 2H Gr50
  • ASME/ASTM SA/A 36, 283 Gr C, 285 Gr C, 572 Gr 50

Applications
  • Bridges
  • Machinery Parts
  • Mechanical Engineering
  • Mining Equipment
  • Oilfield Fabrications
  • Plate Girders
  • Transport Equipment
  • Storage Tanks
  • Wind Towers
Size Range
Thicknesses: 3 mm – 340 mm 
Widths: 2 m, 2.5 m, 3 m, 3.5 m, 4 m 
Lengths: up to 20 m

 

 

 

 

   
Stainless Steel Plates
Duplex Stainless Steel
Super Duplex Stainless Steel
Boiler Quality Plates
Duplex Steel Plates
Nickel Alloy Sheets
Indutsrial Steel Plates
Stainless Steel Sheets
Stainless Steel Coils
Stainless Steel Forged Plate EN 15CDV6
Seamless Pipes
Stainless Steel Welded Pipes
Pressure Vessels
Nickel 200 - UNSNO2200
Hastelloy
Inconel
Monel
Titanium
Pressure Vessel Plates
Boiler Plate Steel
HIC Steel Plate
Quenched and Tempered Steel Plate
Abrasion Resistant Steel Plate
High Yield Cold Forming Steel Plates
Yield Steel Plate
Chrome Moly Plate
Offshore & Structural Plate